Crayon craft for the kids

This tutorial will show you how to make crayons out of old half used crayons or new cheap crayons to make bigger ones for little hands.

You Will need:
Crayons
Muffin Tray
Non Stick cooking spray


First you will need to peel off all the paper of the crayons.


Break up the crayons into little pieces and put them into the greased muffin pan

 

Then decide how you want your colors. (I did mostly all reds, pinks and purples and such together to help my son learn his colors)

Bake at 275 for about 10 min. Time may vary. (They melt fairly quickly)

When melted take them out and let them cool. If it is cold out side I suggest you put them outside or in the freezer. They will take about another 10 min to cool all the way.

When cooled they should pop out of the pan fairly easy. But if not i put a rag over the back and hit it with a butter knife (did not harm the pan) and they all fell out. Thank you! Let me know what you think!

Finished Waste basket

I finished my wastebasket last week but my computer was down, sorry it took so long to get the pic's posted but here it is! Hope you like it!

 

 

Let me know what you think.

Big Shirt to cute fit shirt

My dad Cleaned out his closet and he had a bunch of old new shirts so I thought I would take them and turn them into something I would wear.


First you will need:
Two shirts or one shirt and matching fabric
Sewing machine
Scissors

First you will need to cut off the top and sides of the shirt (Making sure it will fit you) but don't cut anything off that you want to be on the shirt. (Also you need to make sure to be aware of what is on the back.)

Then cut the hem off where you want the second color/ shirt to be the bottom color.

Cut the second shirts bottom off in the length you desire to be the hem color. Make sure to allow about 1/4 in for seam allowance. (If you are using fabric instead of another shirt you will need to make a hem on one side and allow 1/2 in for your new hem and seam allowance on the other side)

Sew on the second color to the bottom.

Then you need to sew a hem in the second color and attach it to the top of the shirt. (Making a tube top)
(If you want the tube top then you are done) If not you can go on to add straps. For those you will want to make straps out of whatever material you want, hem both sides and sew them on to the shirt. Hope you liked it!

I found that both cloths should be elastic like and stretchy otherwise they wont fit or sew together right. Thank you!

Recycled T Shirt Tote

Today I am going to show you how to make a recycled T shirt tote bag.
This project was very quick and easy!

You will need:

T shirts or Fabric (Varying in color 1 is for liner and other is for the out side)
Sewing Machine
Scissors

First you will cut two squares or rectangles out of each fabric or the same if you choose.

(I only figure the one pic was necessary)

Second you will need to sew one side of the liner together with right sides facing eachother.
Then you will need to hem the top of the liner so there are no raw edges.

Complete sewing this by sewing the other side and the bottom together. You will have an inside out bag.

Sew the outside fabric to the inside ( I folded mine right side out first so it was smaller and would for sure fit inside) I also left a little of the raw black edge showing over the top to spice it up a little.

 

Now you will take the hem of the T shirt and cut it in half or to the length desired for the straps. 

 

Make sure to get as close to the seam as possible. (You may have to go over it a few times) Then sew the straps to the inside of your bag.

 

Then you are done unless you want to add any embellishments, in this picture I set a flower I crocheted on top to show how it would look.

  

 

 

 If you have any questions please don't hesitate to ask! 

Recycled T Shirt/ Fabric Rug

Today I will be showing you how to make a recycled fabric rug.

You will need:
Sewing Machine
Fabric

First you will cut your fabric into approximately 2in wide 5in long. (The messier you want it to look make strips different lengths and widths)

Second you will need to cut a piece of fabric into the size and shape you want your rug to become. Then Hem it so there is no rough edges.

 
Then start sewing in lines. (I alternated fabric like doing a checker board)

 

 Sorry the picture is kind of bad.

Keep sewing like this until you reach the end. And your finished product should look something like this:

 

Here is a closer picture:

Let me know how you like it.

Sock Monkey

Today I decided to do someone elses tutorial. I found this sock monkey at www.craftbits.com/project/sock-monkey and it was my first sock monkey to make but it was a lot of fun! (If you have any questions feel free to ask!)

You will need:
A pair of socks
Sewing Machine
Needle
2 Buttons

Here is my sock monkey:

Inspirations

Today I am finishing my waste basket so I will not be doing a tutorial. I am going to post some inspirational pictures from my honeymoon.

 

  

  

  

  

  

  

Magazine Trash Can

Today I am going to show you my steps to making this magazine wastebasket I found here: http://www.apartmenttherapy.com/sf/look/look-recycled-magazine-wastebasket-050277

It was also in The Big Ass Book Of Crafts.

First of all you will need
Magazines
Glue
Hot Glue Gun
Something Round

The first step is to cut several 2in strips from the pages ( cutting the pages the long way)

Then you need to fold the strips starting at one end fold over a piece about 1/2in long and keep folding. Then on the last fold you will want to glue it so it is secure.

When you have several strips you will start rolling them, and keep gluing the strip you are adding each time.

  

And keep going...

Go until you have reached your desired size of the bottom.

You will then need to use your round object to create the sides. I am using a round foundation bottle. You need to take your strip and glue it togeter creating an open circle

After you have your open circles created you will need to start hot gluing them to the base so that they sit evenly with the bottom. (I could not get a good pic of this)


Then you keep adding circles until you get to the desired height. Mine is not finished yet but when I am finished I will add more pictures.

Placing should be between previous circles

 

looking from the top down

Recycled Magazine Bows

For my first tutorial I am going to help you make recycled magazine (or any paper) bows!

You will need:
Paper
ruler
scissors
stapler

First you will need to cut strips into 3/4in (cutting the short length)


Second you will need to fold the papers into an eight shape and staple the middle




Then you will start to layer them together, for the first layer I start with three "8" shapes then staple them


For the second layer I put two "8" strips together



Then i staple those two layers together


From there I staple on one strip at a time until you think it looks right then make a loop and stick it in the middle with a glue dot.


Some of my other bows:Let me know what you think!